iframe page Oakwood Page Here

Floor Protection


Product & installation specifications are subject to change without notice.
Product installation must adhere strictly to the installation manual shipped with product!

The Oakwood requires one of the following forms of hearth protection if not
installed directly on concrete poured on earth, with optional bottom heat shield installed:
1) Any UL, ULC, or Warnock Hersey Listed Type 1 hearth board.
2) Any non-combustible material.

In Canada, floor protection must extend 18" from the front of the stove
and 8" from the "sides" (not from the door as in the US!) and rear of the stove.